Started getting the car ready for VIR today. I didn’t have any big mechanical issues or anything. Just the standard in-between event work. I thought I was going to have to add a rear wheel bearing in to that mix, but after checking everything out, it seems I just have a touch of play in the rear pillowball bearings, and not the wheel bearing. Also, the front tie rods have a *very* slight touch of play, so I’ll replace those after this event.
Other then that, I just did a normal nut and bolt of the whole car, rebuilt the front calipers and bled the brakes, all new fluids and some cleanup. I realized that the fuel leak I thought I had in the trunk was just spilled gas from when I was transporting the car, and the oil leak I had in the front right seems to be from the power steering pump lines rather then something more important. I couldn’t find it, and its not so much of a leak, as its just “oily dirt” around that area, so I figured I’d just pick up all the spare parts I might need, and fix it after this next weekend, unless it gets worse. I cleaned the whole area up, so it should be easier to tell where its coming from, if it is at all. Lastly, I realized I bent the bolts for the rear swaybar endlinks, so have to pick up some new ones tomorrow. Hopefully I can find those in town.
Leaving on Wednesday for Raleigh, and I’m skipping the test day, so I’m hoping the Roebling setup is going to work well for VIR, as I go right into qualifying. I might adjust the shocks a bit to make the car tighter on entry until I get a few VIR laps under my belt, but going to leave the swaybar on the max setting. Seemed to work for Roebling!
